DOLPHIN

DIGIVOX BOX (XL)

DigiVox Frequency Programming

Frequency change fix
1 Menu
2 Factory settings
3 type in code ( 0000)
4 press ok. this will delete channels.
5 Then Hit Installation
6 Change provider (Eg n*L etc)to which ever one used in your area.
7 autoscan ( when it says *** channels found , exit back out all the way until u are back at the scrambled/no signal 'tv' screen)
8 Hit menu again
9 go into sysrem information
10 press info on remote and type in 1004
11 new screen appears , change EMU to on
Then exit back out all the way until u are back at the scrambled/no signal 'tv' screen and hey presto your sorted !

EUROVOX BOX

Eurovox Frequency Programming

 

• MENU
• LANGUAGE
• HIGHLIGHT THE SECOND ONE DOWN ON THE LIST
• TYPE 1968
• CLICK 'OK'

SCROLL TO THE LEFT, UNTIL YOU CAN SEE THE WORD NAGRAVISION ON THE TOP OF THE PAGE.

GO INTO THE FIRST CODE AND YOU WILL SEE WHERE THE KEYS GO

ENTER KEYS AND THEN PRESS THE BLUE BUTTON.

Posted by Stampeo at Wizardmods.co.uk:

BETTER WAY TO MANUALLY CHANGING CODES FOR THE EUROVOX

Press menu on the remote,press the yellow button(TEXT)
Provider=54 01 for NTL ... 5E 01 for chorus
Key 00-key in tne codes for 00
Key 01-key in the codes for 01
using the remote use these butoons for the numbers in the codes
TV= A, RADIO= B, P-=C, P+= D, INFO= E, RECALL= F.
press ok to save and exit to a tv station

________________________________________________

STARVIEW BOX

Starview Programming Code

 

 

GENUINE OR CLONE Starv**w
Counts the vents on top

First Generation = 13 x 7 vents
Genuine = 25 x 7 vents
Clone = 18 x 7 vents

To input keys manually :

press menu
press 1570. (this takes you into secret menu)
Press OK on "nagravision"
Make sure your cable provider is listed at top N*L or T***WEST C&W CHO**S ect
Go down to "Key Number" and check its on 00
Go down again to "Key Data" and input the correct keys
Press OK to store
Go back up "Key Number" and change to 01 using the > button on the remote control
Go back down again to "Key Data" and input the correct keys
Press OK to store
Press "Exit" , Check the bottom option and make sure "Key EMU" is On
Press Ok again
Then "Exit and "Exit" again back to the main tv screen
Then go to a paid channel and should update .
t button on your tv remote not on the Starview remote when the tele text comes up
just go back off wait about three sec and the colour should come back.if that doesn't work try changing your scart lead.

Make sure you're set to TV Type PAL in user settings. Also remember the TV out scart on the Starview is the only one that
supports RGB the other one is only Composite video. If you have a second scart on the tv try that one in case its the telly scart.

Black White

When its black and white press the tele text button on your tv remote not on the Starview remote when the tele text comes up
just go back off wait about three sec and the colour should come back.if that doesn't work try changing your scart lead.

Make sure you're set to TV Type PAL in user settings. Also remember the TV out scart on the Starview is the only one that
supports RGB the other one is only Composite video. If you have a second scart on the tv try that one in case its the telly scart.

________________________________________________

DREAMBOX